Home >> Product >>Other Tester >> FR9010 Lightning protectionstandard resistance tester
Product Detail

FR9010 Lightning protectionstandard resistance tester

    FR9010 lightning protection special standard resistor consists of 9 1/2W high precision military grade wire wound resistor series.When the instrument is calibrated, there is no need to change the line for direct shifting. The test is convenient, the highest precision is up to 0.05%, and the long-term stability is good. It is a special standard resistor specially designed by our company.Its resistance value includes 1mΩ, 10mΩ, 100mΩ, 1Ω, 10Ω, 100Ω, 1KΩ, 10KΩ, 100KΩ. It fully meets the range of 10-3~105 as specified in Order No. 31 of the 《Measures for the Administration of Detecting Qualifications of Lightning Protection Devices》. Mainly used for calibration of grounding resistance tester, equipotential tester, etc.


Collect
Product Model FR9010
Product Introduction

Function

Used for calibration of ground resistance tester, equipotential tester, etc.

Range

1mΩ,10mΩ,100mΩ,1Ω,10Ω,100Ω,1KΩ,10KΩ,100KΩ

Wiring method

Four-wire method

Capacity factor

1/2W

Temperature coefficient

±25ppm

Size

L/W/T:187*119*48mm

Test line length

Red 0.5m,black 0.5m each 2pcs

Weight

About 550g

Working temperature and humidity

-10℃~40℃;below 70%rh

Storage temperature and humidity

-20℃~60℃;below 80%rh

Insulation resistance

More than 10MΩ(between the circuit and the housing 500V)

Pressure resistance

AC 3700V/rms(between the circuit and the housing)

Suitable for safety regulations

IEC61010-1, CAT III 600V, pollution level, JJG166-1993 《DC Resistance Test Procedures》 




Technical Support: 集创思 | Admin Login
×
seo seo